BKRYX - W7000 ACRYSHEEN ACRYLIC, W7000

  • MSDS: BKRYX
  • Manufacturer: EVR GARD COATINGS CO
  • Product Name: W7000 ACRYSHEEN ACRYLIC, W7000
  • National Stock Number: 8010-00N016668
Product Identification

Product ID:W7000 ACRYSHEEN ACRYLIC, W7000
MSDS Date:01/01/1989
FSC:8010
NIIN:00N016668
MSDS Number: BKRYX

Responsible Party
EVR-GARD COATINGS CO
16400 GARFIELD AVE
PARAMOUNT, CA 90723
US

Emergency Phone: 213-531-0131

Info Phone: 213-541-0131

Cage: 5G582

Contractor
EVR-GARD COATINGS CO
PARAMOUNT, CA 90723 US

Telephone: 310-531-0131

Cage: 5G582

Ingredients

PROPANOL, ALLYLOXY- (PROPYLENE GLYCOL), VP=0.1 MM/HG @ 68F

CAS: 1331-17-5

RTECS: UA4900000


ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


PROPIONIC ACID, 2-METHY-MONOESTER W/2,2,4- TRIMETHYL -1, 3-

CAS: 25265-77-4

RTECS: UF6000000

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: MAY CAUSE HEADACHE & NAUSEA,
DIZZINESS. SKIN/EYE CONTACT: PRIMARILY AN IRRITANT. REDNESS/RASH ON
SKIN. INGEST:NAUSEA, DIZZINESS, HEADACHES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:PROLONGED CONTACT W/MATERIAL MAY
CAUSE DERMATITIS.

First Aid

First Aid:INHAL:REMOVE TO FRESH AIR. GET MD. EYES:FLUSH W/CLEAN WATER
FOR AT LEAST 15 MIN. GET MD. SKIN:REMOVE SATURATED CLTHING & WASH
SKIN W/SOAPY WATER THORO. GET MD. INGEST:INDUCE VOMIT W/1-OZ OF
SYRUP OF I PECAC FOLLOWED IN 5 MINUTES W/GLASS OF WATER. CALL MD.

Fire Fighting

Lower Limits:0.6%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . THIS IS A WATER-BASED PRODUCT. WILL NOT
SUPPORT COMBUSTION.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:ABSORB SPILL W/ABSORBENT MATERIAL-SAWDUST,
SAND, CLAYS, ETC., & FLUSH SPILL AREA W/LOTS OF WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:PRODUCT IS STABLE UNDER NORMAL USE &
STORAGE CONDITIONS. KEEP OUT OF REACH OF CHILDREN. KEEP FROM
FREEZING.
Other Precautions:DO NOT TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN DURING APPLICATION TO AVOID EXCESSIVE
INHAL OF VAPORS. OPEN WINDOWS & DOORS OR USE OTHER MEANS TO INSURE
FRESH AIR ENTRY D URING APPLICATION & DRYING.
Ventilation:PROVIDE ADEQ VENT AT ALL TIMES DURING HANDLING &
APPLICATION.
Protective Gloves:BUNA N.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:OBSERVE STANDARD HYGIENIC PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Vapor Pres:ING 1,2
Vapor Density:>AIR
Spec Gravity:1.3
Evaporation Rate & Reference:SLOWER THAN ETHER.
Solubility in Water:DILUTABLE.
Appearance and Odor:WHITE PAINT & COLORS - SLIGHT AMMONIA SMELL.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & ALKALIS & MATERIALS THAT REACT W/WATER.
Stability Condition to Avoid:DO NOT STORE IN HIGH TEMPERATURE AREAS.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:PLACE ALL HAZARDOUS WASTES, INCLUDING ABSORBENTS
USED FOR SPILLS, IN 55-GAL METAL DRUMS & DISPOSE IN APPROVED
DUMPSITE IN ACCORDANCE W/PRESCRIBED FEDERAL, STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.